Sample BGP Commands for Cisco Router

Here is a basic Cisco BGP commands 1. How do I remove a neighbor? router(config)# router bgp router(config-router)# no neighbor 2. How do I shutdown…

Continue Reading...
BGP sample configuration 2-1-1

2-3-1. Cisco Single BGP with Multi-hop (load-balancing) on Ethernet using GRE Tunnel

Cisco Single BGP with Multi-hop (load-balancing) on Ethernet using GRE Tunnel     ISPs : 1 WAN links : 2 CPE : 1 GW :…

Continue Reading...
BGP sample configuration 5-1-1

5-2-1. Cisco dual BGP with Community string-HSRP (Load-sharing)

Cisco dual BGP with Community string-HSRP (Load-sharing)     ISPs : 1 WAN links : 2 CPE : 2 PE : 2 Device : Cisco…

Continue Reading...
BGP sample configuration 2-1-1

2-3-2. Cisco BGP with Multi-hop (load-balancing) on Ethernet using Maximum path

Cisco BGP with Multi-hop (load-balancing) on Ethernet using Maximum path     ISPs : 1 WAN links : 2 CPE : 1 GW : 1…

Continue Reading...
BGP sample configuration 5-1-1

5-2-2. Cisco dual BGP with Community string-iBGP (Load-sharing)

Cisco dual BGP with Community string-iBGP (Load-sharing)     ISPs : 1 WAN links : 2 CPE : 2 PE : 2 Device : Cisco…

Continue Reading...
BGP sample configuration 3-4-2

3-5-1 Cisco dual BGP with Origin Value (Redundancy)

Cisco dual BGP with Origin Value (Redundancy)     ISPs : 1 WAN links : 2 CPE : 1 GW : 2 Device : Cisco…

Continue Reading...
BGP sample configuration 5-1-1

5-1-2. Cisco dual BGP with AS prepend-iBGP (Load-sharing)

Cisco dual BGP with AS prepend-iBGP (Load-sharing)     ISPs : 1 WAN links : 2 CPE : 2 PE : 2 Device : Cisco…

Continue Reading...
BGP sample configuration 3-1-1

4-1-1. Cisco dual BGP with Metric (Redundancy)

Cisco dual BGP with Metric (Redundancy)     ISPs : 2 WAN links : 2 CPE : 1 PE : 2 Device : Cisco router…

Continue Reading...

1-3-1. Cisco Single BGP with Origin value

Cisco Single BGP with Origin value Lowest Origin Type is one of important criteria for BGP best path selection. – Prefer the path with the…

Continue Reading...
BGP sample configuration 1-1-1

1-1-1. Cisco Single BGP with Default Route

  ISP: 1 WAN link: 1 CPE: 1 PE: 1 Device: Cisco router with LAN/WAN ports. WAN / Serial IP: 12.1.3.0/30 (mask 255.255.255.252) LAN /…

Continue Reading...